blog banner 1230

MDSAP (Medical Device Single Audit Program)

flagge en The Medical Device Single Audit Program MDSAP was launched as a pilot project to help medical device manufacturers enter the market in different countries. The MDSAP audit process is expected to become compulsory in the future for all medical device manufacturers who wish to sell their products to other global markets.

The main idea of the Medical Device Single Audit Program (MDSAP) is to allow a single audit process of a medical device manufacturer's Quality Management System (QMS), which satisfies the requirements of multiple regulatory jurisdictions. Instead of many audits and inspections by the authorities of different countries, there should be only one.


Kliniken im Wandel - das Krankenhauszukunftsgesetz

flagge de Lange haben Bund und Länder im Gesundheitswesen rationalisiert, anstatt zu investieren. Zwar hat die medizinische Versorgung in Deutschland trotz mangelnder Unterstützung eine vergleichsweise hohe Qualität, doch die Digitalisierung blieb auf der Strecke. Wie wichtig eine digitale Vernetzung und modern ausgestattete Krankenhäuser jedoch sind, hat sich in der derzeitigen pandemischen Lage deutlich gezeigt. Das deutsche Bundesgesundheitsministerium hat die dringende Notwendigkeit von Digitalisierung und Modernisierung der Krankenhäuser nun endlich erkannt und mit dem Krankenhauszukunftsgesetz (KHZG) welches am 23. Oktober 2020 verabschiedet wurde gehandelt.


Young ladies with painful knees, what can we do for them?

flagge en Patellar instability is a common problem especially among younger ladies often caused by internal torsion and/or a strong valgus. Diverse operational techniques have been presented such as trochleoplasty, MPFL reconstruction, or tubercle osteotomy, but what is the method of choice in which case?
At mediCAD® we see how orthopedics is becoming more and more standardized by concepts like that and want to assist the surgeon in using such techniques without getting a knot in their head or to pore over books. Therefore, all patellofemoral measurements used for the common instability scores can be measured with mediCAD® 3D Knee.


mediCAD 3D Printing - Planning of a Trochleoplasty on a 3D Print

flagge en Technological progress in visualisation techniques like 3D print support clinics in developing customised surgical solutions for patients. Due to the increasing development of technologies and, thus, more complex surgical interventions, better surgery preparation, digital planning and further qualification of doctors are needed. Especially pre-operative planning in 3D can help create palpable models of boney structures in the shape of a 3D printed model and support at therapy decision, or they help visualise the actual situation to doctors-to-be and give them the possibility to simulate the operation in advance.


Browser planning with mediCAD Web

flagge en With mediCAD® Web consultation of an area of interest can be done within a few clicks. Planning works even more effectively and quickly thanks to automatic measurement functions and corrections in a modern user interface with intuitive, reduced workflow. With careful, well-structured preoperative planning, a more patient-friendly environment is established because key information can be shared easily at all stages of patient care. Surgical teams run their planning on time, a fact, that contributes significantly to reducing delays and related operative costs.


mediCAD 3D Hip a winning solution for patients and orthopedic surgeons

flagge en In orthopedic terminology, arthroplasty is the name for surgery that aims to replace a damaged, or fractured joint with a prosthesis that is as close as possible to the original anatomy of the bone structures. mediCAD® 3D Hip plays a vital role in optimizing the outcome of complex surgery. Pre-operative and Post-operative planning with this state-of-the-art software contributes to patients progressing the desired levels of functionality earlier and also to avoid secondary problems.


The rise of computed tomography with mediCAD

flagge en mediCAD® offers you the possibility to plan the surgical procedure in the best possible way.
Only preoperative planning enables an optimal result. Here mediCAD® Classic supports you in the best possible way. You are guided step by step through the planning and receive essential information for the operation, such as stem and, if necessary, cup size, leg length difference, femoral offset, CCD angle, and much more information. 


Mechanical, anatomic, kinematic… TKA alignment techniques: What can I plan and execute by myself?

flagge en Is it the "End of an Era" like Riviere et al. claim, which happens now to mechanical alignment in total knee arthroplasty?

At mediCAD® we think a lot about how to make the currently 20-30% unsatisfied TKA patients happy, and we know, since results are consistent throughout many countries with sufficient statistics, that there must be a systematic error in the implant alignment technique performed so far. Where can this error be?


Advantages of preoperative planning of the inverse shoulder prosthesis with mediCAD

flagge en Bone deformities of the proximal extremity of the humerus can be degenerative or traumatic. Thanks to new technologies such as mediCAD® 3D Shoulder, the surgical advantages in the preoperative planning of inverse shoulder prostheses have been significantly improved. As a result, the implantation of inverse shoulder prostheses has increased significantly in the field of orthopedic surgery.


The landscape of 3D printing and state-of-the-art mediCAD 3D printing images in surgery

flagge en 3D Printing applications by mediCAD® in surgery is a ground-breaking technology offering innovative, creative service options for personalized orthopedic surgery care. While 3D printing has been around for a while the development of mediCAD® software that combines this technology to facilitate the work of surgical teams with innovative 3D printing surgery solutions is the perfect fit for the modern-day surgery room.


mediCAD Vet used within the ENVA

flagge en Interview with Professor Manassero - ENVA

The National Veterinary School of Alfort (EnvA) at the gates of Paris, is one of four veterinary schools in France. Awarding the diploma of Veterinary Doctor after seven years of theoretical and clinical training, ENVA is on the list of European establishments recognized as competent by the European Association of Veterinary Education Establishments (EAEVE).


Swiss Medical Group uses mediCAD Web

flagge en After already several cooperative projects in France, Telemis and mediCAD Hectec GmbH proudly announce ...
Swiss Medical Group uses the cloud-based application mediCAD Web

Landshut, Germany – April 2020: After already several cooperative projects in France, Telemis and mediCAD Hectec GmbH proudly announce to have partnered with the Swiss Medical Network (SMN) group. The latest product of mediCAD Hectec, mediCAD® Web has been deployed and accessible for SMN group clinics since October 2019.


Directions to mediCAD

Headquarter
mediCAD Hectec GmbH
Opalstr. 54
D-84032 Altdorf/Landshut
Germany
Phone: +49 871 330203 0
Fax: +49 871 330 203 99
E-Mail: Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser.
Contact form...

Branch office Bad Homburg:
Werner-Reimers-Straße 2-4
D-61352 Bad Homburg
Germany
Phone: +49 871 330203 0

Subsidiary USA:
mediCAD US, Inc.
191 Peachtree St. NE,
Suite 3720 Atlanta,
GA 30303, USA
Phone: +1 470 3441215
Mobile: +1 404 5482012